The cutting line continues to rotate for a few seconds after the trimmer is switched off. Remove stones, loose pieces of wood and other objects from the cutting area. Turn the shaft 6 90° to position the trimmer head 7 for trimming/edging as shown. A Mounting the Cutting Guard Place the cutting guard 10 on the trimmer head 7. Assemblyĭo not connect the machine to the mains socket before it is completely assembled. E Adjusting cutting head angle: To change the angle depress the foot pedal 12 and move the shaft 6 to the desired position. Pull the shaft out to increase the height, or push Tighten the handle wing nut 3 securely to fix theĪdjustable handle 4 in the adjusted position. To change the position undo the handle wing AdjustmentĬ Using Adjustable Handle The adjustable handle 4 can be set in various positions: B3 The wheels can be moved up and down the shaft 6 depending on the height of cut required. Note: The position of the wheels can be adjusted by loosening the wingnut 18 and moving to the desired position. Mounting the Wheels (ART 30/3000 COMBITRIM only) B1 Fit the wheels 11 onto the shaft 6. The severed plug must be disposed of to avoid a possible shock hazard and should never be inserted into a 13 A socket elsewhere. If the fitted plug is not suitable for your socket outlets, it should be cut off and an appropriate plug fitted in its place. Switch off and remove plug from mains before adjusting, cleaning or if the cable is entangled and before leaving the trimmer unattended for any period. S Switch off and remove the plug from the socket: – whenever you leave the machine unattended for any period – before replacing the spool – if the cable is entangled – before cleaning or working on the line trimmer. After feeding line always return the trimmer to its normal operating position before switching on.
#Bosch art 30 gsd manual update#
MTpro spare parts update 5.0.0.0 ➔ 5.0.1.S Take care against injury from the blade fitted for cutting the nylon line length. Alternatively, the updates can be downloaded from here and installed manually. Please select „Check for updates…“ in the Tools menu. The MTpro spare parts catalog is automatically updated from the Internet. The spare parts catalog for assembly technology can be installed as a program of its own. MTpro light is automatically updated from the Internet.
#Bosch art 30 gsd manual install#
Starting from your actual version, please download and install the files in ascending order.
MTpro is automatically updated from the Internet.
0 kommentar(er)
